TQC Sheen 4-Sided Flim Applicator, Dual Reservoir

TQC Sheen 4-Sided Flim Applicator, Dual Reservoir

Special 4-gap Stainless Steel applicator with double reservoir each with 4 different values. This TQC applicator allows the user two apply 2 layers of coating simultaneously with the same thickness. Ideally for use in combination with the TQC Automatic Film Applicators and TQC Abrasion- & Scrub testers.

Specification
Material : ASAB Stavax ESR medical grade stainless tool steel.
Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*)
Surface treatment : polished
Overall accuracy : ± 2 μm
Accuracy : Better than 3 micron
*Through hardening versus Case-hardening or surface hardening.

Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.

Use
Select the appropriate gap and place the applicator on a plane smooth surface such as a glass plate. Apply a sample of paint in the centre of one or both gaps of the TQC Quadruplex dual applicator near the correct opening. Draw down the applicator over the surface. Due to physical reasons the max. film attainable wet film thickness is not equal to the gap depth. Deposited film thickness may vary from 40% to 80% o

Special Care
• Though robust in design, this instrument is precision-machined. Never drop it or knock it over
• Always clean the instrument after use.
• Only use non-corrosive solvents to clean the instrument. Use a soft, non-abrasive cloth to dry it.
• Never clean the instrument by any mechanical means such as a wire brush or abrasive paper. This may
cause, just like the use of aggressive cleaning agents, permanent damage.
• When stored for a long period of time, wrap the instrument in oil paper
• We recommend annual calibration.

We do undertake Servicing and repairing of TQC Sheen 4-Sided Flim Applicator, Dual Reservoir TQC Sheen Range of products throughout india

Apart from supplying TQC Sheen Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are TQC Sheen Authorized Distributors, Importers, Stockists, Dealers and Suppliers of TQC Sheen 4-Sided Flim Applicator, Dual Reservoir Products in Kerala, Goa, Himachal Pradesh, Ernakulam, Bangalore, Guntur, Pondycherry, Nagapattinam, Vandavasi, Kanpur, Lucknow, Rajapalayam, Sikkim, Ooty, Thrissur, Madurai, Jaipur and etc..