TQC Sheen 4-Sided Film Applicator

TQC Sheen 4-Sided Film Applicator

The TQC 4-Sided Film Applicator (Quadruplex) has four application sides for applying paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is supplied with a guidance support for straight application. This support may be removed as well. The high grade stainless steel will not be affected by acid or base elements.

Specification
Material: ASAB Stavax ESR medical grade stainless tool steel. Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*)
Accuracy : better than 3 micron
Surface treatment: polished
Overall accuracy: ± 2 μm
Outer dimensions : 75 x 20 x 25 mm / 115 x 20 x 20 mm.
*Through hardening versus Case-hardening or surface hardening.

Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.

Use
Select the appropriate gap and place the applicator on a plane smooth surface such as a glass plate.
Apply a sample of paint in the centre of the TQC Quadruplex applicator near the correct opening.
Draw down the applicator over the surface.
Due to physical reasons the max. film attainable wet film thickness i s not equal to the gap depth. Deposited film thickness may vary from 40% to 80% of the clearance/gap depth.
Dry film thickness will be lower than wet thickness due solvent/water evaporation.

Special Care
• Though robust in design, this instrument is precision-machined. Never drop it or knock it over
• Always clean the instrument after use.
• Only use non-corrosive solvents to clean the instrument. Use a soft, non-abrasive cloth to dry it.
• Never clean the instrument by any mechanical means such as a wire brush or abrasive paper. This may cause, just like the use of aggressive cleaning agents, permanent damage.
• When stored for a long period of time, wrap the instrument in oil paper
• We recommend annual calibration.

We do undertake Servicing and repairing of TQC Sheen 4-Sided Film Applicator TQC Sheen Range of products throughout india

Apart from supplying TQC Sheen Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are TQC Sheen Authorized Distributors, Importers, Stockists, Dealers and Suppliers of TQC Sheen 4-Sided Film Applicator Products in Chennai, Assam, Madurai, Coimbatore, Nagaland, Kerala, Manipur, Mizoram, Haryana, Sikkim, VIsakhapatnam, Tirchy, Hosur, Anjaw, Tumkur, Mysore, Kolkatta, Salem, Poonamalle and etc..