TQC Sheen Cross cut Adhesion Test Kit (Master Paint Plate)
TQC Sheen Cross cut Adhesion Test Kit (Master Paint Plate)
TQC Sheen Cross cut Adhesion Test Kit (Master Paint Plate)
The TQC Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Additonal tools
Wet film thickness gauge ranging from 50 microns up to 160 microns.
On the corners there is an edge grind checker for correct roundness of edges.
At the bottom is a wet film applicator ranging from 0 to 180 µm.
The top edge provides a leveling test, an indication of the viscosity of the coating.
Delivery includes cutting tool and tape.
Significance and Use In order for a coating is to fulfill its function of protecting or decorating a substrate, the coating must remain adhered to the substrate. Because the substrate and its surface preparation (or lack thereof) have a drastic effect on the adhesion of coatings, a method to evaluate adhesion of a coating to different substrates or surface treatments, or of different coatings to the same substrate, is of considerable usefulness in the industry.
This test method is limited to evaluating lower levels of adhesion. The intra- and inter-laboratory precision of this test method is similar to other test methods for coated substrates (for example, Test Method D2370 and Test Method D4060), and is insensitive to all but large differences in adhesion. Limiting the range of rankings from 0 to 5 reflects the inability of this test method to make fine distinctions between levels of adhesion.
Users shall not use intermediate values for ranking adhesion tests within this method. Extremes in temperatures or relative humidity may affect the adhesion of the tape or the coating. A given tape may not adhere equally well to different coatings due to several factors, including differences in coating composition and topology. As such, no single tape is likely to be suitable for testing all coatings. Furthermore, these test methods do not give an absolute value for the force required for bond rupture, but serves only as an indicator that some minimum value for bond strength was met or exceeded.
Operators performing these test methods must be trained and practiced in order to obtain consistent results. The accuracy and precision of the test result obtained by using these methods depends largely upon the skill of the operator and the operator's ability to perform the test in a consistent manner. Key steps that directly reflect the importance of operator skill include the angle and rate of tape removal and the visual assessment of the tested sample. It is not unexpected that different operators might obtain different results.
We do undertake Servicing and repairing of TQC Sheen Cross cut Adhesion Test Kit (Master Paint Plate) Imada Range of products throughout india
Apart from supplying Imada Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.
We DFT TECH, are Imada Authorized Distributors, Importers, Stockists, Dealers and Suppliers of TQC Sheen Cross cut Adhesion Test Kit (Master Paint Plate) Products in Chennai, Bangalore, Hyderabad, Pune, Mumbai, Delhi, Calcutta, Ahmedabad, Sricity, Ambattur, Guindy, Sriperumputhur, Oragadam, Tiruvallur, Trivandrum , Coimbatore, Tiruchy and etc..
