Tohnichi Open End Spanner Type Preset Torque Wrench
Tohnichi Open End Spanner Type Preset Torque Wrench
Tohnichi Open End Spanner Type Preset Torque Wrench
Features
Torque wrench with open-end head specially designed for tightening individual bolts.
Open-end head preset torque wrench. A wide selection of standard models backed up by a rapid delivery system
How to set the torque
QRSP Series
Remove the cap by turning it counterclockwise with the Thrust Ring Tool.
Loosen the Thrust Ring Screw (hex setscrew) by turning it counterclockwise with a hex bit.
Turn the Thrust Ring with the Thrust Ring Tool to set a torque.
Use a tester (DOTE3-G,TCC2-G or TF) forntorque setting.
Fasten the Thrust Ring Screw by turning it clockwise with the hex bit.
Fasten the Screw with the specified torque, then lock it. Use a torque driver (Model LTD or RTD)for fastening the Screw.
Fasten the cap by turning a clockwise with the Thrust Ring Tool.
SP2, SP2-MH, RSP2, RSP2-MH Series
1. Insert a Adjusting tool into a adjusting hole.
Note : Adjusting tool is not standard accessory.
2. Set torque by Adjusting tool, with torque wrench tester, DOTE3-G,TCC2-G or TFm models.
Turn the Adjusting tool clockwise to add torque value, and turn counter-clockwise to reduce torque value.
Operating Procedure
Check if the wrench opening fits to the size of bolts or nuts to be tightened. (Select the right wrench for bolts or nuts.)
Set a required torque. (Use the wrench as it is if the torque is set beforehand.)
Apply the wrench head around a bolt head or nut.
Turn the torque wrench clockwise (direction on the tube) to fasten the bolt.When you turn it counterclockwise (opposite direction of ), you don't hear a "click".
The use for tightening the left hand screw or loosening the bolt may cause a failure.
For left threaded bolts or nuts use the wrench upside down.
Stop tightening operation when a click is heard.
QRSP Series
Check if the wrench opening fits to the zsize of bolts or nuts to be tightened. (Select the right wrench for bolts or nuts.)
Set a required torque. (Use the wrench asi t is if the torque is set beforehand.)
Apply the wrench head around a bolt head or nut.
Verify that the direction of arrow on the wrench aligns the tightening direction.
Align a corner of the nut with the ratchet pawl.
Press the pawl strongly against the nut or bolt to lock it into the ratchet wheel.
Pull the wrench clockwise to tighten bolts or nuts.
For left threaded bolts or nub use the wrench upside down.
Ratchet type wrench is very effective in a confined space.
Stop tightening operation when a click is heard.
Open the pawl when the wrench is removed from the bolts or nuts.
We do undertake Servicing and repairing of Tohnichi Open End Spanner Type Preset Torque Wrench Tohnichi Range of products throughout india
Apart from supplying Tohnichi Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.
We DFT TECH, are Tohnichi Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi Open End Spanner Type Preset Torque Wrench Products in Kerala, Goa, Himachal Pradesh, Ernakulam, Bangalore, Guntur, Pondycherry, Nagapattinam, Vandavasi, Kanpur, Lucknow, Rajapalayam, Sikkim, Ooty, Thrissur, Madurai, Jaipur and etc..
