Tohnichi STC2-G (-BT) Indicating Type Torque Screwdriver

Tohnichi STC2-G (-BT) Indicating Type Torque Screwdriver

Features
Digital Torque Screwdriver is ideal for applying torque or performing quality inspections with data caputure for optimal quality assurance.
Equipped with a multi-functional LED illuminating ring, for immediate, easy recognition of tightening status and Pass/Fail judgments during inspections.
1000 data memory capacity
Data-output to PC with USB cable connection
Also available withBluetooth® wireless data transfer See STC3-G-BT Models
Accepts Standard 1/4" hex root bits (sold separately)
CW and CCW with a ratcheting function.
Rechargeable built-in lithium ion battery
Display can be turned upside down with keypad operation for optimal viewing.
Setup Selections include: Measuring/Tightening Modes, Units of Measure, Hi/Lo Judgment, Direction, Auto Memory/Reset Timer, Buzzer, AutoOFF, Baud Rate, Data Output, Default Reset.
Accuracy ±1%,
Ready for use in the EU area.
Compliant with calibration procedures of ISO6789 Type I Class E.
Complimentary Excel® Receiver software transfers data easily into Excel® for expanded data management.
A Tightening Data Management System can be created for Bluetooth-equipped STC2-BT / STC2-G-BT series devices with TDMS Software Package (sold separately)

Outline
The operating instruction describes a digital torque screwdriver designed for tightening and inspection. If the upper-limit and lower-limit values are preset in the tightening mode, you are informed of completion of tightening by a LED and a buzzer. If the upper-limit and lower-limit values are preset in the inspection mode, you are informed of OK/NG judgment by a LED and a buzzer.

Tightening operation
If the upper and lower limits have been set, the LED ring is illuminated in white and the buzzer beeps intermittently when reaching 80% of the lower-limit value. When between the lower-limit and upper-limit values, the LED ring is illuminated in blue and the buzzer beeps continuously. When beyond the upper-limit value, the LED ring is illuminated alternately in yellow and red and the buzzer beeps intermittently at short intervals. Once tightening is completed, press the key.

To clear the data, press the key. If the auto memory/reset has been set, it is activated to increment the counter value by 1 after a lapse of the setting time. If the upper and lower limits have not been set, or if the measured value is below the torque measurement range, the LED ring is not illuminated and the buzzer does not sound.

Measurement value data in the specified range are externally output in a collective manner. The baud rate, data length and parity settings should be made consistent with the settings of the PC to be connected beforehand.

USB Output Method
Install a communication driver in the USB responsive PC.
(Download the communication driver from the Tohnichi Mfg. Co., Ltd. website.)
Set the PC ports and communication format.
(For the installation method and communication setting, see the downloaded operating instruction.)
・Preparation (STC2-G)
Turn on the STC2-G
Make the baud rate, data length and parity settings consistent with the settings of the PC.
・Communication
Connect a USB cable (accessory) to the PC and the STC2-G.
Start communication software. (Option)
・Data output
Data output method (See Measurement Data Batch Output.)
NOTE)・Use the accessory USB cable to connect to the PC.
・Communication may not be enabled unless software is started up after connecting the cable.
・Communication is disabled if multiple units of the STC2-G and our USB serial output products (CEM3-G, ST2, ATGE-G) are connected to the PC simultaneously.

We do undertake Servicing and repairing of Tohnichi STC2-G (-BT) Indicating Type Torque Screwdriver TQC Sheen Range of products throughout india

Apart from supplying TQC Sheen Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are TQC Sheen Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi STC2-G (-BT) Indicating Type Torque Screwdriver Products in Bagalkot, Bihar, Tiruvannamalai, Villupuram, Cuddalore, Dharwad, Delhi, Amristar, Tirupur, Vellore, Punjab, Chattisgarh, Jharkhand, Viruthachalam, Ambala, Dindugul, Chitoor and etc..