Tohnichi RTDFH / RNTDFH Error Proofing Screwdriver

Tohnichi RTDFH / RNTDFH Error Proofing Screwdriver

Features
Error-proofing torque driver with limit switch output to eliminate missed tightening.
Choose between Adjustable RTD or Preset RNTD models featuring limit switch and curled cable to confirm/count each tightening "click"
RTD Adjustable type makes it easy to change torque settings by twisting body to select desired toque on scale.
RNTD Preset type requires torque set with tester and key, so torque is set to one value and secured from unauthorized changes.
The toggle is activated when set torque is achieved. Rotary slip occurs simultaneously with output of a contact signal from the limit switch.
Connect LS tools to Tohnichi's CNA-4mk3 to receive click confirmation and to create a tightening count management system.
Contact relay signal cable may also be connected to your own PCL (Programmable Logic Controller)
RTDLS Supplied with Certificate of Calibration
RNTDLS Models are supplied with no torque setting; If required, request at time of order for a nominal fee.
To set on your own you must have Torque Driver Tester, and adjusting tool (both sold separately)
Wireless Versions also available. See Models RTDFH and RNTDFH
Applicable for international use including the EU region.
Compliant with calibration procedures of ISO 6789 Type II Class D.

Outline
This Remote Signal Torque Screwdriver RTDFH/RNTDFH can send tightening completion signals by radio waves, and it is superior to wired LS torque screwdrivers in workability. The RTDFH/RNTDFH outputs signals received by the receiver to the POKA PATROL CNA-4mk3 (option) or outputs ID data through RS232C. Therefore, a tightening error prevention system with traceability can be established with PC, PLC, etc.

• Resin grip
To replace the battery, remove this grip.
• Communication status check LED
When communication with the receiver is normal, the LED lights up in blue. When a communication error occurs, the LED flashes in red 3 times.
• Check switch (Inside resin grip)
This is used to check the remaining battery life and for communication test.
• Setting mode switch (Inside resin grip)
This is used to set the setting mode to check or change the group/judgment code/ID.
• Channel plate
If channels are specified when you order, the group and ID will be marked on the plate.
Dipole antenna connector This is used to connect a dipole antenna.
• Power LED
When the power switch is turned ON, the LED lights up.
• Receiving LED
When a signal from the torque screwdriver is received, the LED lights up.
• Output terminal
This is used for relay output of signals received from the torque screwdriver.
• Channel plate
If channels are specified when you order, the group and ID are marked on the plate.
Power switch
This is the switch for turning ON/OFF the main unit.
• GND terminal
This is used to connect with the POKA PATROL (CNA-4mk3).
• Setting mode switch
This is used to set the setting mode to check or change the group/judgment code/ID.
• Buzzer switch
This is the switch for setting whether a buzzer is sounded when a signal is received.
• Double tightening prevention timer
This is the timer for setting the time so that only the first tightening is received when a worker conducts double tightening.
• RS232C connector
This is used for output of ID received from the torque screwdriver. Connecting an optional I/OFH256 allows recognition of the transmitter’s ID by the receiver and retrieval of contact outputs corresponding to up to 4 IDs from one receiver.

We do undertake Servicing and repairing of Tohnichi RTDFH / RNTDFH Error Proofing Screwdriver TQC Sheen Range of products throughout india

Apart from supplying TQC Sheen Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are TQC Sheen Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi RTDFH / RNTDFH Error Proofing Screwdriver Products in Chennai, Assam, Madurai, Coimbatore, Nagaland, Kerala, Manipur, Mizoram, Haryana, Sikkim, VIsakhapatnam, Tirchy, Hosur, Anjaw, Tumkur, Mysore, Kolkatta, Salem, Poonamalle and etc..