Testo 175 T1 set - starter pack

Testo 175 T1 set - starter pack

Perfect for long-term measurements: memory records up to 1 million readings, battery life of up to 3 years can be achieved
Practical: you can read the current measuring values, min./max. values, limit values and violations of limit values on the logger’s display
You are ready to start straight away with the set: including three temperature loggers, basic software on CD, USB interface, SD memory card, lock and wall bracket
HACCP-compliant, EN 12830 certified and protection class IP 65

Product Description
The testo 175 T1 temperature logger is your competent partner for dealing with air temperature monitoring in a reliable way. Purchasing our practical set is a good idea, especially if you want to carry out temperature control in several areas: you get three data loggers (with accessories) straight away and, if you are a baker or butcher, you can for instance record the temperature in the cold store, warehouse and sales area at the same time.

State-of-the-art measuring technology, high level of data security
An internal NTC sensor is built into the temperature logger. This NTC sensor provides high-precision recording of the air temperature (±0.5 °C). Because the measuring range of the internal NTC sensor ranges from -35 °C to +55 °C, the data logger can also be used for long-term temperature controls in cold stores or deep freeze rooms.

You can read the current measuring values, set limit values, min./max. values, violations of limit values and remaining battery life on the temperature logger’s display. This means you do not have to read the data logger immediately on the PC, if you want to get a quick overview of the most important measurement data.

The data logger’s large memory capacity (up to 1 million readings) and its long battery life (max. 3 years) also allow less frequent read-out for shorter measurement intervals. The temperature logger can be run with standard batteries (AAA), which can be replaced at any time by the users themselves.

The testo 175 T1 temperature logger guarantees a high level of data security and reliable measurement results based on state-of-the-art measuring technology. Saved measurement data will not be lost even when the battery is empty or being replaced.

Programming and analysis with the temperature logger
This data logger set already includes the ComSoft Basic software on CD. You can programme the temperature logger using this. In addition, the software enables a basic analysis of your measurement data.

Where there are higher requirements in terms of software, we can offer you two further versions:
ComSoft Professional software – available as an option – offers various possibilities for more detailed analysis of the temperature readings measured
ComSoft CFR 21 Part 11 software – available as an option – is well suited for use in the pharmaceutical sector with its special requirements according to CFR 21 Part 11

Tested and certified for use in the food sector
The data logger has also been tested by the TÜV Süd (German Technical Safety Standards Authority) ATP test station according to EN 12830
It has international HACCP certification and is therefore HACCP-compliant
Reliable water jet protection according to protection class IP 65: the temperature logger can remain at the measuring location even when cleaning is being carried out there

Advantage of the set
This set means you are well-equipped for professional temperature control: you get three testo 175 T1 temperature loggers, so that you can record the temperature at the same time in several areas or at several locations. This is practical for small food businesses, such as baker’s or butcher’s, amongst others, which want to monitor the cold store and warehouse, as well as the sales area.

A USB interface, which you need for programming the data logger, is also included in the set. This means you have everything you need in the set to start temperature control straight away. The USB interface which comes with the set also enables the transfer of measurement data to your PC.

You have the option of using the SD memory card for this and this is included in the set as well. In addition, you receive the ComSoft Basic software on CD and can use this to analyze your measurement data on the PC. (Because you get the CD, you do not need to download the software on the Internet.)

Delivery Scope
3 x testo 175 T1 temperature loggers, including wall bracket, lock, batteries and calibration protocol
1 x USB interface for programming and readout of the temperature logger
1 x SD memory card for saving and transferring the measurement data to the PC
1 x ComSoft Basic CD for programming and easy data analysis

Technical Data
Temperature - NTC
Measuring range :-35 to +55 °C
Accuracy :±0.5 °C
Resolution :0.1 °C

General technical data
Weight :156 g
Dimensions :89 x 53 x 27 mm
Operating temperature :-35 to +55 °C
Product-/housing material :Plastic
Protection class :IP65
Channels :1 internal
Product colour :white
Standards :EU-guideline 2014/30/EU; 2011/65/EU; DIN EN 12830
Measuring rate :10 s - 24 h
Battery type :3 x AIMn type AAA or Energizer
Battery life :3 years (15 min. meas. rate, +25 °C)
Interface :mini usb, SD card slot
Memory :1,000,000 measuring values
Storage temperature :-35 to +55 °C

Testo 175 T1 set - starter pack process sensors Range of products are mostly available in ready stock and it can delivered immediately throughout india

Apart from supplying Testo products in India through dealers network, catering to a variety of customers ranging from Electrical Contractors, Engineering Industries, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are Testo Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Konica Minolta Products in Chennai, Pune, Bengaluru, Mysore, Mumbai, Noida, Indore, Nagpur, Mangalore, Surat, Ghaziabad, Faridabad, Gurgaon, Coimbatore, Nashik, Tiruvallur, Karur, Kancheepuram, Vellore and etc..