Taber CS-0 Rubber Specialty Wheels

Taber CS-0 Rubber Specialty Wheels

CS-0 Rubber (same as S-32) - A resilient wheel containing no abrasive particles. Intended for use when a very mild abrasive action is required, or for wet tests such as determining the relative abrasion of dental pastes, cleaning powders, or similar compounds. Adhesive sandpaper strips can be adhered to the periphery of the CS-0 wheel to evaluate the abrasion resistance of high-pressure decorative laminates and other products. CS-0 wheels have an expiration and should not be used after the date printed on the label.

Specialty - Used for special applications.

For both Calibrase and Calibrade wheels, different grades are furnished to meet varying requirements of abrasive action. The composition of Genuine Taber abrading wheels has been carefully chosen to reproduce normal service wear. The quality and uniformity of these wheels is maintained by continuous inspection sampling and tightly controlled manufacturing processes.

Wheels are sold in pairs, and shipped in tight-lidded containers to prevent damage. Each wheel is labeled "LEFT HAND (or RIGHT HAND)" to assure that the mounting position will be duplicated after the wheels have been removed and later re-installed. For Calibrase and Calibrade wheels, the label is also used to indicate the minimum diameter of the wheels (1.75 inch or 44.45 mm OD). When the wheel is worn to the label, it must be replaced.

Depending on the abradant type and test specimen, the wheel surface may change (i.e. become clogged) due to the transfer of material from the test specimen to the abrading wheel, and must be cleaned at frequent intervals. Click here for information on Refacing Options. As the abrasive coefficient of the wheels can also be altered by oil and other contaminants, handle only the sides of the wheels.

Taber abrading wheels produce characteristic rub wear action
Used with the Taber Rotary plateform Abraser, two abrasive wheels create the circular wear path reconized as a Taber test. As specimens are subjected to the rub wear action of the wheels, the abrasion marks form the pattern of crossed arcs resulting in a circular ring. This process abrades the sample over all angles of grain or weave, and covers approximately 30 square centimeter.

Analytical Grade abrasive materials ensure Test repeatability
The composition of Taber abrading wheels has been carefully chosen and a rigorous quality program maintains the uniformly of the wheels. Used in Pairs, each wheels is labeled left or right to assure the mounting position will be duplicated should the wheels be removed and later reinstalled. The wheels should be refaced according to recommanded practice, and can be used to their minimun usable diameter of 45mm O.D.

We do undertake Servicing and repairing of Taber CS-0 Rubber Specialty Wheels Taber Range of products throughout india

Apart from supplying Taber Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are Taber Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Taber CS-0 Rubber Specialty Wheels Products in Bagalkot, Bihar, Tiruvannamalai, Villupuram, Cuddalore, Dharwad, Delhi, Amristar, Tirupur, Vellore, Punjab, Chattisgarh, Jharkhand, Viruthachalam, Ambala, Dindugul, Chitoor and etc..