Pi Tape PM5WEZ 1200mm - 1500mm White easy to Read Metric Tapes

Pi Tape PM5WEZ 1200mm - 1500mm White easy to Read Metric Tapes

Description
Gage Member: 6.35mm
Offset: 12.7mm
Material: White Easy to Read 1095 Spring Steel
Thickness: 0.25mm
Accuracy: ± .03mm

Example
Make certain the tape and object to be measured are both clean.

Each line on the gage member represents .5mm of diameter, while each line on the vernier represents .01mm.

Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension for O.D. tapes (For I.D. tapes, use 0 kg tension).

Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero). In this example, the value is 660.0mm.

Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 23 (0.23mm).

Finally, to obtain the diameter of the object, simply add the two values together: 660.0mm + 0.23mm = 660.23mm.

When using a standard O.D. tape on an I.D. surface, add double the tape thickness to the reading to arrive at the I.D. of the part. It is suggested that direct I.D. tapes be used for inside diameter readings.

As a suggestion for checking very large diameters – pieces of masking tape can be used to hold the tape in the proper parallel position.

Care
Tape is delicate, handle with care. Keep tape clean and dry.
After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment.
* White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product.
White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust.
No periodic adjustments are needed.
Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.

Pi Tape PM5WEZ 1200mm - 1500mm White easy to Read Metric Tapes PI Tapes Range of products are mostly available in ready stock and it can delivered immediately throughout india

Apart from supplying PI Tapes products in India through dealers network, catering to a variety of customers ranging from Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are PI Tapes Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Whatman Quartz Fiber Extraction Thimbles Products in Chennai, Pune, Bengaluru, Mysore, Mumbai, Noida, Indore, Nagpur, Mangalore, Surat, Ghaziabad, Faridabad, Gurgaon, Coimbatore, Nashik, Tiruvallur, Karur, Kancheepuram, Vellore and etc..