Pi Tape PM000SS 15mm - 50mm 716 Stainless Steel Metric

Pi Tape PM000SS 15mm - 50mm 716 Stainless Steel Metric

Description
Gage Member: 6.35mm
Offset: 12.7mm
Material: 716 Stainless Steel
Thickness: 0.15mm
Accuracy: ± .03mm

Example
Make certain the tape and object to be measured are both clean.

Each line on the gage member represents .25mm of diameter, while each line on the vernier represents .01mm.

Wrap the tape around the object to be measured. The vernier scale should be just below the gage member. Tighten the tape around the object with 2.25 kg tension.

Locate the “zero” on the vernier scale and note the highest value achieved on the gage member above it (the highest value to the left of the zero). In this example, the value is 27mm plus 3 lines or 27.75mm.

Next, observe the vernier scale’s value at the point where it lines up exactly with a marked division line on the gage member. In this example, the value is 15 (0.15mm).

Finally, to obtain the diameter of the object, simply add the two values together: 27.75mm + .15mm = 27.90mm.

Direct Inside Diameter tapes are not available in this style.

These Pi Tape® gages are guaranteed to ± .03mm accuracy

Care
Tape is delicate, handle with care. Keep tape clean and dry.
After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment.
* White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product.
White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust.
No periodic adjustments are needed.
Make sure the tape has not been stepped on or kinked, which may destroy the accuracy.

Pi Tape PM000SS 15mm - 50mm 716 Stainless Steel Metric PI Tapes Range of products are mostly available in ready stock and it can delivered immediately throughout india

Apart from supplying PI Tapes products in India through dealers network, catering to a variety of customers ranging from Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are PI Tapes Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Whatman Quartz Fiber Extraction Thimbles Products in Melvisharam, Nagpur, Poonamallee, Rajpur, Thiruvananthapuram, Indore, Guwahati, Bhubaneswar, Kozhikode, Warangal, Ludhiana, Tiruchirapalli, Cuddalore, Nayveli, Ooty, Ambattur and etc..