Lutron DW-6093 3 Phase Power Analyzer

Lutron DW-6093 3 Phase Power Analyzer

Features
* Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W.
* 3 current probes (CP-1201) are included, if change the current probes, the calibration procedures are not necessary.
* Current probe input signal/ranges with selection: Input signal (ACV) : 200 mV/300 mV/500 mV/1 V/2 V/3 V. Ranges (ACA) : 20 A/200 A/2000 A/30 A/300 A/3000 A /6000 A.
* Meter can cooperate with other universal current probes.
* Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe (CP-1201), AC to DC 9V adapter, 4G SD memory card and Carrying bag.
* Voltage & Current are the True RMS value.
* True Power (KW, MW, GW).
* Apparent Power (KVA, MVA, GVA).
* Reactive Power (KVAR, MVAR, GVAR).
* Watt-Hour (WH, SH, QH, PFH).
* Power Factor (PF), Phase Angle (Degree).
* Voltage range : 10 to 600 ACV.
* Current range : 0.2 to 1200 ACA, CP-1201.
* Programmable CT ratio (1 to 600) and PT ratio (1 to 1000).
* ACV input impedance is 10 Mega ohms.
* Safety Standard : IEC 1010, CAT III 600V.
* Built-in clock and Calendar, real time data record with SD memory card , sampling time can be set from 2 to 7200 seconds. Just slot the SD card into the computer, all the measured values with the　time information (year, month, data, hour, minute, second) can be downloaded to the Excel directly, then user can make the further data analysis by himself.
* Powered by AA (UM-3) DC 1.5 V x 8 PCs batteries (Alkaline type) or DC 9V adapter.
* Computer data output, can cooperate with optional USB Cable/USB-01, RS232 cable/UPCB-02 and Data Acquisition softwares, SW-U811, SW-E802.
* Optional current probes : CP-1201, CP-200, CP-2000, CP-2011, CP-3000, CP-3001, CP-6001.
* User can order the meter only (without the current probes) with the special request if intend to cooperate their own current probes.
* Patented.

Specification
Circuit :Custom one-chip of microprocessor LSI circuit
Display :* LCD Size :81.4 X 61 mm (3.2 X 2.4 inch)
* Dot Matrix LCD (320 X 240 pixels) with back light.
Measurement :ACV, ACA, AC WATT (True Power), AC WATT(Apparent Power), AC WATT(Reactive Power), Power factor, Phase angle, Frequency.
Wire Connection :1P/2W, 1P/3W, 3P/3W, 3P/4W.
Voltage ranges :10 ACV to 600 ACV, auto range.
Current probe Input signal range :* Current probe input signal volage (ACV) :200mV/300mV/500mV/1V/2V/3V.
* Current probe input current range ( ACA ) :20 A/200A/2000A (1200 A)/30A/300A/3000A
* Meter can cooperate the universal current probe.
Safety standard :IEC1010 CAT III 600 V.
ACV input impedance :10 Mega ohms.
Range select :ACV :Auto range, ACA :manual range.
Clamp frequency response :40 Hz to 1 KHz.
Spec. tested frequency :45 to 65 Hz.
Over load protection :ACV :720 ACV rms, ACA :1300 ACA with clamp probe * For the Clamp ,CP-1201
Over Indicator :Show "OL".
* The data save into the SD card will show "9999" or "999" (overleap the decimal point).
Under Indicator :Show "UR".
* The data save into the SD card will show "9999" or "999" (overleap the decimal point).
Data Hold :Freeze the display reading.
Data Record :SD Card Record.
Sampling Time :Approx. 1 second.
Power ON/OFF :Manual OFF by push button.
Real time data logger :* Real time data logger, saved the data into SD memory card and down load the all the measured value with the time information (year/month/data/hour/mimute/second) down loadto the Excel.
* Integration time for data logger :2 seconds to 7200 seconds, the during of setting step are 2 seconds.
Data Output USB/RS232 :RS232 computer serial interface :
* Connect the optional USB cable USB-01 will get the USB plug.
* Connect the optional RS232 cable UPCB-02 will get the RS232 plug.
Operating Temp. :0 to 50℃ ( 0 to 122℉ ).
Operating Humidity :Less than 80 % R.H..
Power Supply :* DC 1.5V, AA ( UM-3 ) Battery X 8 PCs (Alkaline or heavy duty battery).
* AC to DC 9V power adapter.
Power Consumption :* Meter : 300 DCmA, * Clamp : 34 DCmA.
Clamp max. conductor Size :50 mm (2.0 inch) Dia.
Weight * Meter: 948g (includes batteries), * Clamp : 467g
Dimension :Meter : 225 X 125 X 64 mm (8.86 X 4.92 X 2.52 inch)
Clamp : 210 X 64 X 33mm (8.3 X 2.5 X 1.3 inch)
Clamp Jaw : 86 mm (3.4 inch)- outside
Accessories Included :* Instruction manual, Test Leads (TL88-4AT) -1 Set (4 PCs), Alligator clips (TL88-4AC) -1 Set (4 PCs), Clamp Probe (CP-1200) -3 PCs, AC to DC 9V adapter, SD card (2 G), Carrying bag.

We do undertake Servicing and repairing of Lutron DW-6093 3 Phase Power Analyzer lutron Range of products throughout india

Apart from supplying lutron Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are lutron Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Lutron DW-6093 3 Phase Power Analyzer Products in Chennai, Wayanad, Gujarat, Odisha, Rajasthan, West Bengal, Tripura, Palakkad, Kanyakumari, Theni, Krishnagiri, Namakkal, Sivagangai, Perambalur, Dharmapuri, Erode, Pudukottai and etc..