LabThink FP AUTOSPECK

LabThink FP AUTOSPECK

The facts of recycled fiber in today’s paper market
1. Consumer and regulatory requirements for higher recycled content.
2. Global dem+++and for secondary fiber sources continue to increase.
3. Pressure to use secondary fiber that had previously been deemed unusable

With each step taken towards utilizing these sources both the deinking facility and the paper machine are dealing with a higher potential for contaminants to foul the operation and final product.

With this comes the need to develop better tools for analyzing the processes to determine if:
• the cleaners are working at maximum efficiency
• contaminants are being removed from the process
• there are any potentials for deposit build-ups in the paper machine
• the paper machine is going to get hit with a “contaminant storm”
• the printer is going to see any runnability issues due to contaminants

Technidyne, in association with FPInnovations, is pleased to introduce to the market the FPAutoSpeck™. The FPAutoSpeck™ marries proven image analysis software with innovative sample classification and presentation techniques to bring to market a powerful tool for macrocontaminant analysis. The FPAutoSpeck™ can be operated in the fully automated mode, sampling process streams and pulp cleaning operations or it can be operated in the manual mode for doing additional analysis or one time test.

The FPAutoSpeck captures the contaminant data critical for good process control and provides it to operations in a format that is going to allow for quick analysis and proper decisions. If you find your operations are challenged by out-of-control contaminants, then the FPAutoSpeck™ can give you the tools to absolutely manage your process.

The FPAutoSpeckTM brings to your process:
• Built-in screening capabilities to separate macrocontaminants (>150 microns)
• Advanced image analysis software for thorough analysis of stickies and dirt in your pulp stream
• Robust on-line pulp handling technology for hands-free operation
• DCS (Distributed Control System) compatibility
• Repeatable and reproducible data that provides operators and/or mill process control system
the information for confident decisions and quick responses

Testing continuously with a new sample every 15 minutes the FPAutoSpeckTM collects the sample, sorts the stickies from all other material, separates the light (low density) stickies from the heavy (high density) stickies, captures the image and processes the data. Once the testing is completed then the data is sent to the mill system for analysis and decision making.

Hands-free operation, requiring no human intervention, the FPAutoSpeckTM can provide not only an analytical understanding of your operations, but a significant tool to make decisions on saving chemical cost, energy cost, process time, manpower and improving product quality and customer satisfaction.

As the entry point for the recycled fiber, establishing a quality baseline of incoming pulp is critical. Knowing what you have and understanding what needs to be done to get it ready for the papermachine is critical to operations. Each day and each supplier brings in new challenges.

Pulper
Getting data from the start, helps build the foundation for good decisions downstream. Never miss this point of analysis, as it is a picture of your future. Without this data, optimization of your process becomes much more difficult.

Flotation Cells
Often times the flotation cells are thought of as only ink removers, but they are also very useful at removing stickies, especially low density or light stickies. Low density stickies will float out with the ink, attached to air bubbles. Monitoring the efficiency of this removal can give a clear picture of how well the flotation cells are working.

In addition, low density stickies will have a negative impact on ink removal by taking up space on the bubbles. Optimization of air content, chemistry and stickies level in your flotation cells will provide a great opportunity to save big on energy, chemistry and process/dwell time.

HeadBox
While measuring at the headbox may not be an option, somewhere close to it will give an overall health report of your process. Measuring at the pulper and then at the headbox will provide an overview of the stickies removal of your entire system. Secondly, it is the last check prior to the pulp reaching the papermachine.

On occasion as whitewater is used to dilute the pulp stream, stickies find their way back in to the stream via contaminated whitewater. A last check here can ensure that nothing unexpected reaches the paper machine. Optimizing the entire deinking process is made possible with the effective use of the FPAutoSpeck

We do undertake Servicing and repairing of LabThink FP AUTOSPECK labthink Range of products throughout india

Apart from supplying labthink Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are labthink Authorized Distributors, Importers, Stockists, Dealers and Suppliers of LabThink FP AUTOSPECK Products in Chennai, Wayanad, Gujarat, Odisha, Rajasthan, West Bengal, Tripura, Palakkad, Kanyakumari, Theni, Krishnagiri, Namakkal, Sivagangai, Perambalur, Dharmapuri, Erode, Pudukottai and etc..