Konica Minolta CM-26dG spectrophotometer
Konica Minolta CM-26dG spectrophotometer
Konica Minolta CM-26dG spectrophotometer
The CM-26dG spectrophotometer is the next generation of portable sphere spectrophotometer with an integrated 60-degree gloss sensor allowing distinct color and appearance measurements within one instrument. CM-26dG spectrophotometer horizontal alignment can fit into narrow spaces and is convenient for high-precision color and gloss measurement of smooth or textured samples.With its lightweight ergonomic design gives easy operation to both right or left-handed users, with the optional Bluetooth™ and high-resolution TFT color display, the CM-26dG spectrophotometer is perfectly suited for applications in the field.
The CM-26dG portable spectrophotometer offers unprecedented accuracy/inter-instrument agreement (IIA), usually reserved for laboratory-grade instrumentation. This precision will allow superior color communication throughout the supply chain from supplier to final assembly.
The inter-instrument agreement of the chromaticity value (average for 12 BCRA color tiles) is within ΔE 0.12 for the CM-26dG spectrophotometer, an improvement of about 40% from previous models.
The CM-26dG spectrophotometer can switch between Ø8mm and Ø3mm measurement areas for measuring parts of different sizes. In addition, the CM-26dG spectrophotometer is equipped with an illuminated viewfinder for accurate positioning on patterned subjects or small parts. The instrument surfaces, which come in contact with the measurement subject, are designed to minimize subject damage giving repeatable results.
The CM-26dG spectrophotometer offers additional features to improve workflow, eliminate waste/rework, and offer customers general cost savings on color related processes.
Available as a free download is the CM-CT1 Configuration Tool software that allows users to create/write instrument settings as well as compile it into a file and share it within its supply chain to ensure instrument settings are consistent.
Being able to filter stored data based on additional information (tagging) as well as image-based workflows for easy and simple usage by operators with limited instrument experience, it sets a new standard for easy and fast data handling. Combined with a reduced measurement time, this allows users of all levels to maintain high levels of productivity, accuracy, and consistency.
Features
d°:8° geometry with Xenon Flash technology and optical sample viewer
Integrated 60°-gloss sensor
Two measurement areas: MAV (8mm) and SAV (3mm)
Best-in-class Inter-Instrument-Agreement for true “Digital Color Data Management”
Connectable via USB and optional Bluetooth™
Large and easy-to-read high-resolution 2.7” TFT color display
Group sorting of data by user-definable tags
Image-based workflows
Specification
Color
Illumination/ viewing system :di:8°, de:8° (complies to DIN5033-7, JIS Z 8722c, ISO7724/1, CIE No.15)
Integrating sphere :Ø54mm
Detector :Dual 40-element silicon photodiode array
Spectral separation device :planar diffraction grating
Wavelength range :360-740 nm
Wavelength pitch :10 nm
Half bandwidth :approx. 10 nm
Measurement range :0~175%
Resolution: 0.01%
Light source :Pulsed Xenon lamp
Light source life time :more than 1 Million
Illumination area :12.0×12.5 mm
Measurement area :MAV: Ø8.0 mm
SAV: Ø3.0 mm
Measurement time :approx.1sec (SCI or SCE + gloss measurement)
Min. measurement interval :approx.2sec (SCI or SCE + gloss measurement)
Repeatability :Standard deviation within ΔE*ab 0.02
IIA :within ΔE*ab 0.12 (MAV/SCI) Average for 12 BCRA Series II color tiles compared to values measured with master body.
UV control :UV100 / UV0
Observer :2°, 10°
Illuminants :A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12, ID50, ID65, User Illuminant
Displayed data :Spectral values/graph, Colorimetric values/graph, Color-difference values, Pass/Fail Judgement, Pseudocolor, Graphical Workflows (Job)
Colorimetric data :L*a*b*, L*C*h°, HunterLab, Yxy, XYZ, and Color Differences in these color spaces, Munsell
Indexes :MI, WI (ASTM E313), YI (ASTM E313, ASTM (1925), ISO Brightness (ISO2470), WI/Tint (CIE), DIN99o, Strength, Opacity, Greyscale
Color difference formulas :ΔE*ab (CIE1976), ΔE94 (CIE1994), ΔE00 (CIE2000), ΔECMC (l:c), HunterΔE, ΔE99o (DIN6172)
Gloss
Measurement geometry :60°(complies to ISO 2813, ISO 7668, ASTM D523-08, ASTM D2457-13, DIN 67530, JIS-Z8741, JIS-K5600)
Light source :White LED
Detector :Silicon photo diode
Measurement range :0-200 GU
Resolution: 0.01 GU
Measurement area :MAV: Ø10.0 mm
SAV: Ø3.0 mm
Repeatability :0-10 GU: 0.1 GU
10-100 GU: 0.2 GU
>100 GU: 0.2% (Standard deviation)
IIA :0-10 GU: ±0.2 GU
10-100 GU: ±0.5 GU (MAV)
Data memory :Targets: 1.000
Sample: 5.000
Battery performance :approx. 3.000 measurement/charge
approx.1.000 measurement/charge when using Bluetooth™ communication
Display :2.7 inch TFT color LCD
Languages :English, German, French, Italian, Spanish, Portuguese, Russian, Turkish, Polish, Chinese (Simplified), Japanese
Interfacing :USB2.0, Bluetooth™ (optional)
Power :Rechargeable Lithium-ion battery, USB bus power
Charging time :approx. 6 hours at complete discharge
Operation temperature/ humidity range :5-40°C / rH 80% or less (at 35°C) with no condensation
Storage temperature/ humidity range :0-45°C / rH 80% or less (at 35°C) with no condensation
Size [mm] :81.2×93.3×228.6
Weight [g] :Approx. 660 g
Konica Minolta CM-26dG spectrophotometer konica-minolta-color-and-appearance-measurements Range of products are mostly available in ready stock and it can delivered immediately throughout india
Apart from supplying Konica Minolta products in India through dealers network, catering to a variety of customers ranging from Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.
We DFT TECH, are Suppliers of Konica Minolta Products in Chennai, Pune, Bengaluru, Mysore, Mumbai, Noida, Indore, Nagpur, Mangalore, Surat, Ghaziabad, Faridabad, Gurgaon, Coimbatore, Nashik, Tiruvallur, Karur, Kancheepuram, Vellore and etc..
